Automatic waste oil recycling technology takes Jane

        Lubricant during use at high temperature and high pressure conditions cracking and condensation; contact oxidation with air deterioration in certain catalytic metal oxide increased; while additive decomposition, destruction, loss of the original purpose of the additive .

         Waste oil deterioration mainly reflected in the mechanical impurities seriously overweight, excessive moisture, acid value increased oxidative deterioration and loss of four anti-wear additives. Mechanical impurities seriously overweight refers to a large number of oil mixed with abrasive grit during use, while anti-wear additives continue to reduce losses caused by oil film strength, so that the interface can not be kept to a minimum equipment lubrication film thickness and a low coefficient of friction, resulting in mechanical wear and tear, such as drawing , of the tile; acid value of the total performance of all oil acid, the acid value of the oil will rise from surface corrosion of metal, if the presence of water, the water can rust the metal surface, the device can induce and accelerate corrosion .

Although the oil consumed in the course of some, but the vast majority of oil regenerated after processing can be used to re-use. Regeneration of waste oil can not only save the limited oil resources, but also for the protection of the environment is also very important. Therefore, the development of a variety of domestic and waste oil recycling technology.

The base oil regeneration technique, the filtered oil is used, removal of the extractor into the light components of diesel, gasoline and diesel, base oils by the remaining components of the extractor and separation of heavy impurities, the separation of the lubricating base oil component. Is far from the base oil the boiling point of the extractive distillation separation, it is superior to the use of conventional distillation to separate the difference in boiling point, it is in a high vacuum technology based on an innovative technology. Using this technique, the base oil yield is high, a small amount of wastewater generated throughout the production process, waste, emissions through recycling utilization to achieve "three wastes" zero emissions, the heating temperature is much lower than the pyrolysis temperature, distilled internal lubricant base oil index close to or equivalent to new oil, safety and environmental protection. Waste oil by molecular distillation of the product ingredients: heavy fuel oil accounted for 15% of the part, recycled lubricating base oil accounted for 45%, 40% non-standard diesel.

 

  As energy increasingly tense, how to effectively improve the efficiency of industrial oils and prolong life, recycling of reach, while also reducing the amount of oil, reduce production costs, reduce pollutant emissions. Therefore, recycling of waste oil, the economic and social benefits are very significant. Old oil purification regeneration technology is the global issues of common concern, it is not just saving reuse of resources, which makes more sense is to reduce the serious damage caused by the mineral oil to the ecological environment, improve the living environment of mankind on Earth .

1 processing one ton of waste oil pre-tax profit of 2,511 yuan (7890-5200-179) = 2511 yuan;
2-year deal with waste oil 700 tons / day = 21,000 tons X300-day, pre-tax profit of 21,000 tons × 2511 yuan = 52.73 million yuan;
Note: The waste oil handled the moisture content, impurities out of the different products, the occurrence of costs vary.